1 / 2
Ikea Elloven bracket/holder (universal fit)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the model to fit desks of any thickness.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Print at 100%, the side with the notches facing the build plate, no supports required.
After printing, put the two parts on the ends of the Elloven's opening in the back, move it till you get the placement you want, then simply pull the Elloven towards the back and put some hot glue on the side of the table to attach the two pieces. If you have two Ellovens that you want to push together side by side, simply add some hot glue in the middle and then quickly push them together for a couple of seconds.