OUTATIME License Plate Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 365x281.05mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm

#161f27 PLA Panchroma Black Transmission Distance: 0

#1e4aa6 PLA Polymaker Blue Transmission Distance: 0.1

#b70000 PLA Polymaker Red Transmission Distance: 2.1

#ffffff PLA Panchroma White Transmission Distance: 3.2

#e39322 PLA Panchroma Orange Transmission Distance: 3.2

This print uses 5 unique filaments

Swap Instructions:

You do not set Layer Swaps in the slicer. Instead each color is a separate STL file.

The file is named with the piece (Base or Nest) and filament color.

Load all STLs for one piece at once — your slicer will ask if it is a Multi-part model. Select yes.

Assign filaments by color name in the slicer's Object view.

Print everything together. No assembly required after printing.

Swap Instructions:

You do not set Layer Swaps in the slicer. Instead each color slider is represented by an STL file.

The file is named with the filament at the end so it's easy to assign them in the slicer.

Load all of the STLs at once and your slicer will ask if it is a Multi-part model. Select yes.

Load up your filaments, then assign them in the Object view tab by clicking on the colored box

and either pressing the number of the filament or clicking a second time and selecting from the dropdown.

FlatForge Printing Instructions:

FlatForge prints REQUIRE automatic Filament Swapping because colors are mixed throughout all layers.

If you have selected Double Sided or Face Down the model is already rotated face down

and there is a transparent layer of your Base Layer thickness on the bottom.

Since this is a full layer, you may pause at layer 2 and swap a spool of filament (or a tool) and continue.

This is the only swap that will work.

NOTICE: You may notice some small gaps and minor errors in the split files.

This is a work in progress and I hope to have these resolved in future versions.

In the meantime, small numbers of errors do not affect the print results.

Color Drop Printing Instructions:

This model has been split into 3 nested pieces.

Each piece is split by color for color-by-object printing.

Original height: 2.88 mm

Tallest piece: 1.68 mm

Height saved: 1.20 mm

Nest at Panchroma_Black (layer 7 → layer 0)

Nest at Panchroma_Black (layer 3 → layer 0)