XT30 plug grip for MaxxFrames M2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU grip designed for XT30 battery connectors :D i was having trouble getting the batteries off so i made this.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
TPU grip designed for Maxxframes M2 XT30 battery connectors :D i was having trouble getting the batteries off so i made this! i highly recommend printing extras because of how they go on. there is an edge on the inside of the grip to secure the grip for plugging and unplugging without worrying about losing it or the grip falling off. this unfortunately can make it a bit difficult to actually install so if you install them on many batteries you may ruin a few before they seat correctly. hope this helps you too :)