iPhone 5 iPhone SE Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed samlego2 case for a slightly slimmer profile. You will need 7 x 5mm countersunk M3 screws. Your printer has…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 1731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed samlego2 case for a slightly slimmer profile.
You will need 7 x 5mm countersunk M3 screws.
Your printer has to be well tuned, as tolerances are very tight
I suppose scaling could be used if the case turns out too tight for you.
Small improvements: the buttons only fit in the right order and will maintain their orientation.
The backplate is a blank meant to be customized.
This thing was made with Tinkercad. Edit it here
Print Settings
Printer:
Wanhao i3 Duplicator
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2 mm
Infill:
15% or more
Category: 3D Printing