Schoolbag Safety Light - Ghost
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach this easy-to-print and easy-to-build cute ghost light for enhanced safety!
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This cute ghost has an opening for a standard LED light and an eyelet for attaching it to a schoolbag for enhanced safety!
It is a tinier version of my original Halloween ghost.
Also check out my owl version of the safety light!
How to Print
Download and open the 3MF file with everything set to go, or:
For filament I strongly recommend Lithopane filament for translucency.
Choose a low layer height (e.g., 0.15mm)
Paint on support enforcers on the inside of the head.
Make sure you randomize seams
How to Build
Lights
The light inside are HL lights with (colored version or uncolored version) you can buy from any of the large retailers. Their specs are:
3cm diameter
waterproof
turn at the bottom to switch on/off
remote for adjusting the color
You can also try other similar lights. You may have to adjust the scaling for different diameters. Happy to hear from your experience!
Build
Print, push in the light from the bottom. Don't push to hard! Make the top part flush with the bottom of the ghost. That's it.
Disclaimer
This print may help increase visibility in low-light conditions, it does not guarantee safety or prevent accidents. This model is NOT a substitute for proper traffic safety education, adult supervision, or adherence to traffic laws and safety practices. This model is NOT a substitute for proper traffic safety education, adult supervision, or adherence to traffic laws and safety practices.
Keep your children safe in traffic!
Having said that: Have fun and happy printing!
Onshape Model
You can find the onshape model here.