Yolocam S3 - Privacy Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-In-Place hinged privacy cover for the Yolocam S3 webcam.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
There is a very similar model online that I tried before. That version is kind of a snap fit, but it loosens up after just 2-3 days of usage, until it barely stay on the webcam.
That's why I designed this version where the ring that holds on to the camera is closed. I used a slightly bigger diameter than the lens-body and added small pegs on the inside in hope to achieve a good friction fit with this.
On my printer this model comes out with a perfect fit on the Yolocam S3.
To improve first layer / overhang quality you might want to place the 0.2mm deeper (3.8mm instead of 4mm) in your slicer.