Adafruit Ice Tube Clock Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to replace the excellent (but fragile) acrylic laser cut case that came with the kit. (The cat did it...) I…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is to replace the excellent (but fragile) acrylic laser cut case that came with the kit. (The cat did it...)
I love this clock, too bad Limor doesn't sell it anymore.
There are two models, a simple one (here) without a back, and a more complex one, v2, with a back that holds with two 2mm screws (here). This one has even more of the honeycomb structure.
Please upload a picture of your prints!
Print Settings
Printer:
Wanhao i3 Duplicator
Resolution:
0.2 mm
Infill:
Doesn't matter
Notes:
3 perimeters, 3 top, 3 bottom
Supports do not seem to make a difference.
Category: Electronics