Mean Well 150W PSU Enclosure – FreeCAD Source Included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact enclosure for a 150W Mean Well PSU (160×97×30 mm), with rubber feet, LED light pipe and editable FreeCAD source.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Mean Well 150W PSU Enclosure
A compact enclosure designed in FreeCAD for a 150 W Mean Well power supply.
My particular power supply is a 12 V model, but the enclosure should also be suitable for other Mean Well power supplies with the same physical dimensions.
The power supply this enclosure was designed around measures approximately:
160 × 97 × 30.2 mm
A small amount of additional space is provided for wiring and connections.
Parts
The enclosure consists of four printable parts:
Bottom enclosure
Slide-in top cover
TPU rubber feet
LED light pipe / light guide
The small cylindrical light pipe is inserted into the top cover directly above the power supply's status LED. I recommend printing this part using transparent or translucent filament, allowing the LED to remain visible when the enclosure is closed.
Cable openings
The bottom enclosure has separate openings on one side for:
AC mains input cable
DC output cable
Their placement corresponds to the terminal layout of the Mean Well power supply used for this project.
Printing
I recommend printing the main enclosure parts in PETG.
The top cover is designed to slide into the bottom enclosure with a relatively tight fit. With my PETG print, the fit was secure enough without using any adhesive.
If your printer produces slightly different tolerances, a small amount of glue can be used for additional security.
The feet are intended to be printed from TPU.
For the LED light pipe, transparent or translucent PETG/PLA is recommended.
Assembly
For securing the power supply and cables inside the enclosure, I used hot glue, which worked well for my build.
Depending on your application, other suitable mounting or strain-relief methods can of course be used.
Source files
The original FreeCAD source file is included, so the enclosure can easily be modified for:
different cable diameters
connectors or switches
alternative power supply dimensions
additional ventilation
different mounting methods
Safety
This enclosure may contain mains voltage.
Before powering the unit for the first time, carefully verify:
all wiring
input and output connections
DC polarity
terminal assignments
insulation and strain relief
that no exposed conductor can contact the enclosure or other terminals
Always double-check the wiring before connecting the power supply to mains voltage.
Work with mains voltage only if you understand the associated electrical hazards.
