Waveshare ESP32-S3 7inch Case Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and minimalist stand for the Waveshare 7-inch case created by 3D_Project3R.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the Waveshare 7-inch EPS32 model I use is to display aircraft traffic near me, I needed a case to hold it and used the model that 3D_Project3R created/remixed to house it.
This is a great housing except now I needed a way to display it, so I designed this simple stand. It has a 22.5° tilt which works very well for me and holds the case solidly.
I also place adhesive backed rubber strips on the bottom to prevent it from sliding around.
I used PETG for durability and the clean print it creates. 25% rectilinear infill, 3 walls and ironing all top surfaces are my standard for durability.
Enjoy!