Minecraft Villager No Color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minecraft Villager Figurine. Sorry for not uploading a lot, I'm busy with Python endeavors.Easy to print, only an…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- People
- Licencja
- Creative Commons — Attribution — Noncommercial
Minecraft Villager Figurine. Sorry for not uploading a lot, I'm busy with Python endeavors.
Easy to print, only an hour. Took me 10 minutes to design so sorry for the quality.
Print Settings
Printer Brand:
FlashForge
Printer:
Guider II
Rafts:
Yes
Supports:
Yes
Resolution:
Standard - Low gives bad results for small size.
Infill:
15%
Notes:
-210C for Extruder, 60C for Bed.
-Hexagon Infill Pattern that Combines every 2 layers
-2 Perimeter Shells and 3 Top And Bottom Solid Layers
-First Layer Height is 0.27 mm and Layer Height is 0.18 mm
-Print Speed is 60mm/s while Travel Speed is 80mm/s or better (less)
-Turn Cooling Fan on when bottom raft is printed.
-Takes about 1 hour to print with raft and supports.
-Print on back with linear supports
NOTE - These are all FlashPrint settings, if something doesn't make sense, just use your normal PLA settings. (15% Infill + Supports are required for a good and functional print)
Category: Scans & Replicas