Thumb Tack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small thumb tack. Bends really hard, so I'll leave this one up to the metal 3D…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A small thumb tack. Bends really hard, so I'll leave this one up to the metal 3D printers.
(In case you were wondering, that link goes to a google search on metal 3d printers.)
:) Thanks!
Print Settings
Printer Brand:
FlashForge
Printer:
Guider II
Rafts:
Yes
Supports:
Yes
Resolution:
0.16
Infill:
50% at 3d Infill
Notes:
!!!NEEDS SUPPORTS!!!
-210C for Extruder, 30C for Bed.
-Hexagon Infill Pattern that Combines every 2 layers
-2 Perimeter Shells and 3 Top And Bottom Solid Layers
-First Layer Height is 0.27 mm and Layer Height is 0.18 mm
-Print Speed is 60mm/s while Travel Speed is 80mm/s
-Turn Cooling Fan on when bottom raft is printed.
-Takes about 10 ish minutes to print with raft.
Custom Section
What I Learned
I learned how to revolve something properly in Fusion 360, for 15 minutes I was trying to do it wrong.
Category: Replacement Parts