1 / 1
Professor Motor Controller Tray for Harbor Freight/Stalwart Slot Car Pit Box — zdjęcie 1

Professor Motor Controller Tray for Harbor Freight/Stalwart Slot Car Pit Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

to hold your controller from sloshing around!

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
1
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Best printed in PETG or something else with good layer bonding. PLA will break too easily for the "tines" that hold the controller in.

It's worth noting that the STL is multiple meshes combined. If you split it to parts, you can remove or reposition any of the parts.

If you need to split it for printing on a smaller machine, I'd recommend splitting vertically through the two "mushrooms" of the cable holder part, and add in a couple pegs while you're at it.

This is as yet untested, but should work just as well as the slot.it SCP version. 

Thanks to MattB12 for the source models!