canon fd to ef mount conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
conversion for the canon fd 135 f/2.5 s.c.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- GNU General Public License v3.0
fd to ef mount conversion for the Canon FD 135mm f/2.5.
just a simple remix of the original, it now has room for the ef locking pin and the holes on the side have been covered.
print settings:
material: abs/asa (petg is probably also fine)
layer height: 0.2
top/bottom layer: 5
parimiters: 5
infill: 40%
support: everywhere.
tutorial on how to install the mount(different mount but installation works the same):
after installation you probably need to re-calibrate infinity focus, luckily its pretty easy. loosen the 3 grub screws on the focus ring(no need to fully remove them) push the focus ring up to reveal a little stop plate.
put the lens on a camera and turn the lens to infinity, point the lens at something far away, zoom in on the live view screen. remove the 3 screws and the stop plate, turn until everything is in focus, reinstall the stop plate and screws (i had to move min all the way to the other side) move the focus ring all the way down turn it to infinity and tighten grub screws.