Michigan State (MSU) Golf Ball Stencils
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom MSU themed golf ball stencil/markers. PLA Friendly, but PETG is recommended for flexibility.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
These stencils include a straight line marker and a snug fit on the golf ball. Two "springs" firmly keep the ball in place while marking it. Finally, the tabs on either side make it easier to hold the stencil and include a hole for a key ring.
It is recommended to print the stencils with PETG for its better flexibility, but PLA will work just fine. The models seen are printed in ELEGOO MATTE PLA.
Do not include supports for the straight line marker, they are not needed.
To mark the ball, I recommend a fine tip sharpie, as some of the areas are too small for a typical marker.
Some clean-up/finishing may be needed depending on your printer. The print in the photo has no post-processing outside of removing supports.
The ".3mf" files include two print files, 1 standard, and one for mixed material supports.
More designs incoming.
If you'd like a new design, feel free to leave a comment. If I have time, I can make one for free (no promises) as I expand out the collection!