1 / 9
Hubsan 501 Landing Gear w/ Go Pro Base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Important Notes : Base has room on "top" for an Extra battery. Adjustable base height via slots on legs. I used…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Important Notes :
- Base has room on "top" for an Extra battery.
- Adjustable base height via slots on legs.
- I used supports to give the Go Pro mount bolt hole a more defined shape.
- Legs can be used with or without base
- Rubber bands keep the legs from sliding on the drone arms.
- Printed & Tested in PLA @ 60% infill (for strength)
- Go Pro mount has room underneath base for a Hero Sessions . Other Go Pro's may fit but have not been tested.
- I have not flown the 501s with both the Go Pro and the xtra battery at the same time. Not sure if the drone can handle the added weight of both items. If you use both a Go Pro and the extra battery... test thoroughly for stability before you fly far from home.
- B = back / F = front of base
- Less % of infill = less weight on drone. For strength and durability reasons I haven't tested infill below 60%
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Resolution:
.2
Infill:
60% +
Notes:
Tested on Hubsan H501A/H501S/H501S-S but may fit other drones that have a similar arm thickness. rn
Category: Hobby