Garrett Pro Pointer Tip Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used a .4 nozzel with a .8 (mm) thickness on shell , top and bottom. I've printed these at 50% and 100% but they…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 790
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I used a .4 nozzel with a .8 (mm) thickness on shell , top and bottom. I've printed these at 50% and 100% but they should work well on other infill densities. Feel free to remix this tip however you want to. I was in a hurry when I designed it so I know theres room for improvements.
Because these tips are rounded they may need to be printed with supports on some printers.
-Now print , slide on and go metal detecting !
Updated : 6-29-18 Fixed a print imperfection in the model spikes large.stl ( spikes large v2)
Please note: The larger tip may not work on some holsters. Mine is worn some so it slides in and out fine. Any suggestions or questions please feel fee to comment.
Print Settings
Printer:
Maker Select v 2.1
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50%
Category: Other