1 / 2
Bullet Caddy 5.56 | A Compact 30rd Ammo Box for 5.56 x 45mm NATO — zdjęcie 1
1 / 2

Bullet Caddy 5.56 | A Compact 30rd Ammo Box for 5.56 x 45mm NATO

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An ammo box for 5.56 x 45mm NATO cartridges designed to be as compact as possible.

Ocena
0 / 5
Polubienia
8
Pobrania
11
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made the Bullet Caddy 5.56 (BC556) because I was annoyed at how 5.56 often comes in 20rd boxes despite AR mags being 30rds. It's also an easy way to segment bulk ammo into single mag amounts. This is NOT meant to be one of those nice, fancy, and/or rugged cases. It was made to to fit inside most .30cal ammo cans as a requirement first and foremost, which it does.  Two of these are the same size as 3 paper/cardstock 20rd boxes. You can fit 17 of these in a common plastic .30cal can for 510 rds total.

The insert is specifically made to only contact the cartridge's neck and shoulder. There are both windowed and solid variants depending on if you prefer seeing the cartridge tip or keeping debris out. Do keep in mind that while the retention tabs are enough to statically hold the rounds, they will fall out if you shake the ammo box when holding only the insert while the bullet tips are up; and vice versa holding on the shell with bullet tips down (although in this case a slight squeeze is enough to keep everything in even while shaking). 

It may be on the tight or loose side and require some tuning depending on your specific printer and settings since the tolerances are very tight. Specific print settings aren't all that important as long as they don't affect dimensions.

Tagi