Creator 5 Pro Miscellaneous Gap Remedies
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plugs & Gaskets for sealing miscellaneous gaps found in the Creator 5 Pro to mitigate the escape of printing fumes.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a collections of Plugs & Gaskets that we have created for sealing up miscellaneous gaps that we have found in our Creator 5 Pro so as to mitigate the escape of printing fumes into the air we breadth. We hope these plugs and gaskets can benefit other Creator 5 Pro owners too.
You can see our Youtube Short on these remedies using this https address(you have to type this address into your browser). We could not paste link this address as Printable somehow can't show Youtube Short.
These plugs and gaskets were developed after our other Creator 5 Pro models:
DIY Exhaust Fan Kit
DIY Exruder Dock Vent Cover
for the purpose of sealing off miscellaneous gaps unaddressed by our previous models.
So we suggest using these plugs and gaskets only after implementing our DIY Exhaust Fan Kit and Extruder Dock Vent Cover, as they only serves as final touches to our previous 2 efforts to have clean air around our Creator 5 Pro.
The ultimate purpose of all these models is to have printing fumes exit the Creator 5 Pro only via its Exhaust Fan outlet and not anywhere else, and in such a manner that either these fumes are filtered before exiting the printer or are channeled to an external filter system or to an exhaust duct. The factory delivered Creator 5 Pro does not have such inherent abilities/features.