1 / 6
Adapter TV-Halterung Novus Sky zu Aufstellstange — zdjęcie 1
1 / 6

Adapter TV-Halterung Novus Sky zu Aufstellstange

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter um eine Novus Sky TV-Halterung an eine 28mm Aufstellstange im Vorzelt zu befestigen

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

DE:

Modelldateien für eine Novus Sky TV Halterung. Damit kann der TV aus der Schwenkarm Halterung entnommen werden und beim Camping zum Beispiel im Vorzelt an einer 28 mm Aufstellstange befestigt werden.

Die Schrauben dazu durchstecken und von hinten mit einer M6 Mutter/Flügelmutter  oder Sterngriffmutter an der Stange befestigen. Den TV dann in die Halterung einhaken. Zur Rutschhemmung habe ich etwas Moosgummi dazwischen geklemmt. Die M6 Sterngriffschrauben in den Bildern stammen nicht von mir. Es gibt hier aber diverse Modell dazu.

Das Modell wurde mit BFF ASA gedruckt um bei eventuell hohen Temperaturen im Vorzelt sicher und stabil zu sein. Als Schrauben wurden 30mm M6 Flachrundschrauben mit Vierkantkranz verwendet.

  

EN:

Model files for a Novus Sky TV mount. These allow the TV to be removed from the swivel-arm mount and attached to a 28 mm support pole—for example, in an awning while camping.

Insert the screws through the mount and secure them to the pole from the back using an M6 nut, wing nut, or star-head nut. Then hook the TV into the mount. To prevent slipping, I wedged a piece of foam rubber between them. The M6 star-head screws shown in the pictures are not mine. However, there are various models available here.

The model was printed with BFF ASA to ensure it remains safe and stable in the event of high temperatures in the awning. 30mm M6 flat-round screws with a square collar were used.

Tagi