Hemisphere trucks for stationary Skateboard practice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed hemispheres for stationary skateboard practice PLA core with TPU outer shell
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed hemispheres for stationary skateboard practice.
Direct replacement for standard trucks, secured with same M5 bolts as the trucks themselves. No additional parts needed. TPU shell slides onto the PLA base easily and is recommended to avoid unwanted slippage.
Print:
2x HemiTrucksPLAHemisphere.stl Used PLA+ Recomend 6+ walls and 30% infill. This has been sufficient for 220ish lb humans to use. If you want to go wild on it or require more weight support, increase the walls and infill. Does need support along outer edge, recommend using support blockers for the 4 attachment holes
2x HemiTrucksTPU_Shell.stl used 95A TPU, no supports or brim needed. used 3 walls for strength.
Category: Sport & Outdoors