Aquarium Cable Dampener (Aqueon)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect for dampening vibrations that travel up the cable and cause rattling against the tank edge.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- GNU General Public License v3.0
Designed for Aqueon Standard Aquariums
Designed to reduce unwanted noise from aquarium pumps by dampening vibrations that travel up the power cable or tubing. These vibrations can cause annoying rattling or buzzing when the cable rests against the edge of the aquarium, lid, stand, or other hard surfaces.
The dampener provides a soft contact point that helps isolate the cable from the tank edge, reducing vibration transfer and the resulting noise. It’s a simple solution for keeping aquarium equipment quieter without modifying the pump or its installation.
Ideal for pumps, powerheads, wavemakers, and other aquarium equipment that can transmit vibrations through their cables.
Recommended print setting
Filiment: TPU 95A Shore Hardness (Polymaker PolyFlex TPU95)
Filament Profile: NinjaTek Cheetah TPU
Layer Height: 0.3mm
Infill: 5% Gyroid
Perimeters: 1 Perimeter
Paint-on seam recommended: Ensure that the seem is outside of the tank somewhere. 3MF File includes a tested seam location
Note: Design tested on an Aqueon 29 Gallon Aquarium