1 / 1
Rockford Fosgate R165X3 speaker grill
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two piece speaker grill made to accommodate the R165X3 tweeter and print without supports
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
This is a two piece speaker grill design specifically for the Rockford Fosgate R165X3. I included four different designs for the grill and they can be thicker if needed to strengthen the mesh.
I printed mine in PETG so it work survive car temperatures. I used E6000 to attach the mesh to the body, then also glue the entire assembly to the speaker using a thin layer on the inner ring edge. The body fits tightly to the speaker, so very little glue was required.
