Morakniv Garberg Belt Loop Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt Loop Set for Morakniv Garberg
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't really like the belt loop of the Morakniv Garberg so i designed my own:
The 3D-models contain the “rings” you can slide on the sheath, they lock in place and have holes for rivets.
Just take some cotton belts, punch holes in the places the rivets will go and press-fit them.
As you can see in the pictures above you can also add another smaller belt width a button annd sew it on ther bigger belt to prevent the knive from falling out the sheath. Just get creative width your own belt loop design.
IMPORTANT: The studs in the rings, that lock in on the sheath may be a bit to big, depending on your printers tolerances. If you have to press to hard to get the ring in place take a small file or a knive, flatten them a bit and try again. If you force the ring on your sheath you might not get it off again.
All parts can be downloaded as .stl and .step for custom changes.