Anycubic ACE 2 Pro Internal Filament PTFE Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an internal filament guide designed for the Anycubic ACE Pro.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It helps ensure smooth filament feeding inside the ACE Pro and prevents binding or friction. The project consists of two 3D printed parts that connect together using a standard piece of PTFE tube (the same type used to connect the ACE Pro to the printer).
The model is designed with a slight interference fit to hold the PTFE tube tightly in place without extra hardware. Adding a drop of glue between the tube and the printed parts is optional, but it can provide an extra level of retention.
BOM / Additional Parts:
1x Short piece of standard PTFE tube (ID 2mm / OD 4mm)
Super glue / CA glue (optional)
Print Settings:
Printer: Anycubic Kobra 3
Material: PETG or PLA
Layer Height: 0.20 mm
Infill: 20% - 30%
Walls/Perimeters: 3
Supports: No
If you like this project, please consider leaving a like. It really helps and motivates me to create and share more designs.
If you print it, I'd also appreciate your feedback. Let me know how it fits, how it performs, and if you think there are any improvements that could make the design even better. Your suggestions are always welcome!