VirtuE3 Panel_Base Vented
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a vented base plate to allow the z steppers to breathe
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
VirtuE3 Panel_Base Vented
###### Please post your Makes ######
Please like this, download and post the make if you built it
It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forwardFeel free to help my projects continue https://ko-fi.com/gcodegearhead
Intro
I wanted the hot air coming off the stepper motors to be able to escape the base.
I added 3mm holes in a grid pattern to achieve this.
Instructions
The DXF file is uploaded for straight cutting.
There are 3 drill jigs for those who have already cut their panels.
use the M3 mounting hole and screw to fasten the drill jigs into place with an M3 washer and nut on the other side.
Use an 3mm drill bit to drill the holes. Recommend drilling onto a piece of scrap wood to not crack the acrylic.
Drill Jigs must be in this orientation
