Hasselblad 907x Cold Shoe adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short, low profile, precise flash/accessory mount for Hasselblad 907x camera body.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cold shoe flash mount adapter for Hasselblad 907x body I use for my radio flash trigger. Modelled precisely after the original Hasselblad name tag plate it fits nicely without wiggling and is properly aligned along the lens axis.
Flash mount has been modelled based on ISO 518-2006 flash mount with additional clearance for flash shoe contact pins.
The adapter only fits on 907x body, regardless the CFV version. It doesn't fit the new flash mount position that has been introduced on CFVII 100C digital back.
Instructions:
Take a look at the proper print orientation!
For bed slinger printer consider re-orienting along the Y axis to avoid swinging
Use at least 3 perimeters
Use more top and bottom full layers
Use 30% inflill
Possible to print without supports but I use small one for the bottom curved part.
Use as small layer height as possible. Mine is 0.1mm on Prusa Core One+
Both PLA and PETG materials are fine and durable, but I prefer PETG.