Stumblor Lolly board bracket Harry Potter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for the Stumblor Lolly board used for the glowrails in Jersey Jack pinball Harry Potter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a printable bracket for the Stumblor Lolly board used for the glowrails in Jersey Jack pinball Harry Potter. I used layer height 0.15mm and 25% infill. I printed in PETG, but PLA should also be fine.
You could also use the included print file (PETG or PLA) if you've got a Core One printer with 0.4mm nozzle installed.
I also included a .DXF variant for lasercutting the part and chamfer the screw holes yourself.
You can replace the acrylic holder from Stumblor for this one so you can hang the Lolly board in the back of the machine using 2x 6-32 12mm screws. There are unused threaded holes in the back of the machine.