1 / 2
LED PSU Bracket Mount IKEA LEDBERG
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a low-profile clamp/bracket used to mount an Ikea LEDBERG 12-volt power suppply to the underside of a cabinet with one screw. A regular #8 or drywall screw can be used.
For best results, I chose to print this thing with the slanted face on the bed, without support but with a 7mm skirt. The skirt was then removed and the surface finished by hand, which took maybe 5mins per bracket.
Print Settings
Printer:
BIQU B1
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20
Filament:
Generic PLA PLA
White
Category: Kitchen & Dining