Gridfinity Bins for Bobbins - L Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
various stackable gridfinity bins for L style sewing and embroidery prewound bobbins
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A few sizes of stacking gridfinity bins sized to fit L style prewound bobbins.
A 3x1 grid with 12x1 bobbin slots
A 3x3 grid with 12x5 (60 total) bobbin slots
A 3x4 with 12x7 (84 total) bobbin slots
And they fit snugly, but not where they are difficult to get in or out. I tried to focus on making it as dense as it could be while still being usable. Even with my thicc fingers I can reach in and grab them without issue.
Files
Upload step and stls exported from freecad. I can share the freecad file if it's helpful, they're just annoying to anonymize so I didn't.
Compatibility
Sized specifically for L style bobbins. They may work with size 15 bobbins but that was not the intent.
Size L spec (or what maggie frames tells me the size l spec is) is
13/16 inch (20.3mm) in diameter
11/32 inch (8.7–8.9mm) in width
I have these bobbins specifically: https://allstitch.com/collections/prewound-embroidery-machine-bobbins/products/12-bobbins-fil-tec-magna-glide-machine-embroidery-bobbins-size-l-white
Allstitch sells the magnetic ones in packs of 12 or 100, and the non-magnetic prewounds in packs of 144, so multiples of 12 seemed fine.
See attached photo for how they fit.
Uses standard gridfinity footprint and a stacking lip. I personally use Clickbase Refined (https://www.printables.com/model/1487592-clickbase-refined-a-no-magnet-latching-gridfinity) rather than magnets, but magnet holes are present.
To use your preferred base, you may want to consider using: https://gridfinity.tools/rebase/
Which seems neat but which I have not used yet.
Pictured printed in Polymaker Panchroma Matte PLA on a Prusa Core One L with a 0.4HF nozzle at .2mm layer height.
AI Use
I made this with the assistance of clankers. I am learning FreeCAD and find it helpful as I work through -- if there are unidiomatic parts of the design or suggestions on improvements I would love to hear it.
Attribution
Uses Zack Freedman's Gridfinity design and is likewise CC-BY-NC-SA.
Related Models
See a collection of all the gridfinity bins I've published here: https://www.printables.com/@anyas_4885711/collections/3716001