Insect Screen for Bathroom Vent (Blauberg 150mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original screen required that the cowl needed to be removed to clean it so I designed an external push on screen
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
This print provides for an external access Insect screen for a Blauberg 150mm external cowl. The original screen required that the cowl needed to be removed to clean it so I removed it and fitted my print to make it more accessible. It is designed to be a push on fit to the exhaust cowl and not to interfere with the backdraft stopper flap.
My cowl was a stainless steel type but it appears that new ones are only in ABS. From product photos my print may fit the newer ABS type.
I printed in PETG for flexibility and durability, ABS/ASA may be OK as well. I cut some stainless steel mesh to fir and used a 3D Pen print to glue it to the print.
You will need supports for the back ledge of the print