Skadis Pegboard - High Slot Density
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis pegboard screwed to wall. Extra slots. 280mm x 280mm. Can be stacked side by side and maintain slot pitch.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Skadis pegboard intended to be screwed to wall or to a board that is screwed to a wall. I wanted a bit more flexibility for mounting Skadis items that the standard Skadis pegboard doesn't have. So I so put a full set of slots on every pitch while also reducing the filament required for the print. If the boards are installed side by side the slot pitch is maintained so items can be installed spanning two (2) plates.
Printed in PLA on a CoreOne L. Each plate is 280mm x 280mm. Also uploaded the solidworks file so changes can be made to suit the user.