TF2 Flare Gun 40max version (Nerf 40 max shell blaster)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flare gun design to launch the contents of 40 max shells
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 112
- Wydruki
- 2
- Wyświetlenia
- 1256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice
Pretty straightforward; shoots from 40 max shells. I don't have any, but I happened to design this thing called the ShockMax 40 shells that go with it pretty well :) Note: it has a two-part trigger; the top releases the barrel and the bottom fires.
BOM
#4 3/8in self tap screw x17
4mm Shock Cord ~0.2m
Any small spring under 5mm OD and 20mm in length x2
Printing
Instruction
Pretty straightforward. Assemble the grip and barrel separately, then join them together.
Lay the internals for the grip on the right-hand side; place the small spring in the green location
Another under the trigger
Start the barrel assembly by joining the barrel to the hinge with qty 2 #4 screws, going through this opening
Finally, give the striker pin some tension by passing the 4mm shock cord through this opening; tie knots on both ends after tension the best you can.