Galaxy Z Fold 3 Case for Junglecat Controllers & S-Pen Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a phone case for the Samsung Galaxy Z Fold 3 that accepts Razer Junglecat Controllers. There is also a slot…
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 647
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a phone case for the Samsung Galaxy Z Fold 3 that accepts Razer Junglecat Controllers. There is also a slot for an S-Pen Pro
You can use them in both portrait and landscape.
I have made holes so the speakers are not blocked when using it in landscape.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
100
Filament: Jayo PLA+ White
Notes:
Print with supports for the port-hole overhangs. I would suggest .2mm or smaller layer height, ideally .12mm
May need to file!
May need to file!
The controller rails can be pretty tight from support material, so I suggest filing the channel down so the controller does not have to be forced in. Get it so it gives just a tiny bit of resistance. If you force it you will likely split the case so take your time.
Category: Mobile Phone