Retractable Silicone Wire Cassette – 7-Spool Holder for Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silicon wire cassette with holder for Ikea Skadis board
- Ocena
- 0 / 5
- Polubienia
- 115
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my remix of the [Incredibly Convenient Silicone Wire Box_Directly Usable with IKEA SKADIS Pegboard] by DMTLee. I really liked the original concept, but it didn't quite fit my setup, so I redesigned it for my own requirements.
I wanted to use larger commercially available silicone wire spools and have the ability to retract the wire back into the cassette when it isn't needed.
UPDATE: The spool is included now.
What I changed
📏 Larger cassette designed around the wire spools I use: 20 mm thick × 55 mm outer diameter × 25 mm inner diameter
🔄 Retractable wire — rotate the spool to pull the wire back into the cassette
🔩 Screw-on cap keeps the spool securely inside the cassette
🧱 Redesigned 7-spool wall holder to accommodate the larger cassettes
🪝 New mounting hooks designed specifically for the holder
Assembly
The release mechanism can be secured with a short piece of filament wire.
I used a 0.5 × 5 × 10 mm compression spring, 5.5 N, but any spring with similar dimensions and force should work.
Compatible spool
Designed for these spools: