GFC V2 Things
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just sharing my GFC prints that I find useful.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Sharing some useful things I made for my GFC V2 Camper. I used ABS 100% infill.
Clip1 I use for the rainfly poles. The only difference in the clips is the pole direction, up or down. I use the clip that snaps upward on the t-track because the pole pulls up when attached to the tent flap. I use clip2 by screwing in stainless steel bolt to use as temporary hooks while camping. I like these because I don't have to mess with the t-nuts and bolts to move things. They just quickly snap on and off.
The clips can be modified a bit to allow a .1 or .2 mm larger gap for the t-track. I found that as it gets hot the ABS expands a bit making it difficult to snap them on and off.
I also included some of my GFC molle panel grommets.
Clips 1 and 2 and the molle panel grommets I created from scratch. Clip 3 and the t-track nuts I downloaded from somewhere and made slight modifications. I can't remember where I got these.
Free for personal use and printing. Commercial use, selling physical prints, or distribution requires explicit written permission. Please message me directly to discuss commercial licensing.