Automotive Key Cutting Duplication Jig for Dremel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Key duplication machine.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Recommend using diamond disk to avoid change in blade size from wear. Use light downward finger pressure in between the key clamps and very lightly brush it back and forth across the blade. Avoid too much side pressure to not bend or bounce the blade. I also had to use my other hand to hold the base as the vibration made it move, but a clamp could fix this. Always wear eye protection.
I added my FreeCAD file for the dremel adaptor if you want to adjust it.
I extended the base in slicer by splitting into parts expanding the middle and recombining so no source files for that.
Sized for 1.5in EZlock disks. They scrape the base a little but it worked.
Still uses m4x16 screws