TowerPro or Hextronik 5 gram servo mounting box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are mounting boxes to mount small 5 gram Hextronik or TowerPro (they are the same) servos in a wing. There is a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
These are mounting boxes to mount small 5 gram Hextronik or TowerPro (they are the same) servos in a wing. There is a left and right version included, including a lid that attaches with #1 screws.
The servo is a push-in fit, no need to glue it into the box. The box itself is glued into the wing, then the servo is a push-fit in, last is to screw down the lid. Easy.
Print Settings
Printer:
Artillery X1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
Hatchbox PETG but anything works PETG
Black
Category: R/C Vehicles