Hard Slim SlipCase for GameSir X2s / X2 / X2 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted find a hard case for my GameSir X2s and I only found 2 designs. So I decided to make my own.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Story
I wanted find a hard case for my GameSir X2s and after searching for a while I literally found only 2 designs which were either too big and bulky, or too revealing for me. So, I decided to make my own.
Print Recommendations
The test file initially was made for testing how controller fits during initial development, but it also can be used for testing tolerances and print settings before going for the full fledged model.
For the print settings there are not a lot of requirements except for preferably print outer layers first and do consider that it was designed for hard plastics in mind like PLA.
(I have printed it on 0.3 with 20% Locked Zag infill, since I just wanted it to be functional, so I did sacrifice esthetics)
(Also I added two indentations, so you could wrap it with a rubber band if you want better security)
