Def Leppard British Flag Name Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pour some sugar on it! Print the iconic Def Leppard logo set over the Union Jack flag as a 3D wall display
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Step into the high-octane 80s hard rock era! This 3D display plaque captures the classic, triangular-influenced Def Leppard logo overlaying a relief-detailed Union Jack (British Flag) baseplate—paying homage to the NWOBHM legends' UK roots.
This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Border / Framing Options Included:
To match your setup preference, this model comes with two base configurations:
Framed (With Outer Border): Features a full surrounding perimeter rim to cleanly frame the Union Jack motif.
Frameless (No Outer Border): Clean edge design where the flag pattern extends straight to the outer sides.
Easy Multi-Color Printing:
The model is engineered with distinct z-height steps for the flag pattern background, the raised letter borders, and the inner text insets. You can easily achieve a striking multi-color display (blue/white/red flag with bold yellow and red lettering) using basic z-height filament swaps—no multi-material unit (AMS/MMU) required!
Dimensions
Framed Version (With Border):
Width: 9.2”
Height: 4.7”
Thickness: 0.4063”
Frameless Version (No Border):
Width: 9.0”
Height: 4.5”
Thickness: 0.375”
Lettering Specs:
Text Width: 8.0”
Text Height: 3.3854”
Text Thickness: 0.1875”
Text Inset Depth: 0.0625”
Total Thickness: 0.5625”
Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws or small finish nails for a completely flush wall mount.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the blocky angles of the letters and sharp flag lines).
Infill: 10% or higher (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Looking for the triangle era variant?
Check out my companion listing here:
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: