1 / 4
1/8" Hose barb clamp for airline tubing.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small hose clamp made to connect standard 1/8" ID aquarium airline vinyl hose to a 1/8" barb fitting. I make…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 360
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
This is a small hose clamp made to connect standard 1/8" ID aquarium airline vinyl hose to a 1/8" barb fitting.
I make RC aircraft and do a lot of vacuum bagging. My normal pulls are in the range of about 22 to 24 inches of mercury and the aquarium hose works fine.
This part needs about 75% infill, 2 walls, 3 top and bottom layers. Printed with an ANET A8.
Print Settings
Printer:
ANET A8
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
75% or more
Category: R/C Vehicles