Jersey Jack pinball Harry Potter upper playfield ramp raiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A raiser for the upper (Quidditch) playfield ramp in the Jersey Jack Harry Potter pinball.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a printable raiser for the ramp in the upper Quidditch playfield in the Jersey Jack Harry Potter pinball. On some machines the ramp flap will be raised slightly (see picture 3), thus making this shot harder.
My machine also had this problem, so I designed this piece to put under the ramp.
My machine has a playfield protector by Pinball Universe that is 1.2mm thick. So when extracting 1.2 from 3 (that my raiser needed to be) it should be 1.8mm that should work (see picture 4). But I made a couple of different heights if this is not the correct one.
According to this post on pinside it's 2.28mm (3 creditcards in thickness).
I printed it in PETG with a layer height of 0.2mm and an infill of 25%. Used support on the small left and right side.