Pillbook (a pillbox that doesn't look like one)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pillbox that looks like a small book (with AirTag slot).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a pillbox that looks like a small book. It will contain several pills/tablets in 3 major compartments (breakfast, lunch, dinner) plus one extra compartment and a slot for an AirTag. The AirTag is simply press-fitted.
How to build
The model is designed to be glued together with superglue. Since the drawer is held magnetically, you will need: 4 x 4.5mm*9mm*2.6mm magnets to make it work, or adjust the width of the drawer a little to make it more snug.
Print all parts. If you want it to look more like a book, maybe print the sides a different colour. I printed everything in PLA.
Glue the magnets to the base and drawer.
Glue the sides to the base and the front of the drawer. Make sure that the side that is glued to the drawer is flush with the corner and meets the other "pages" correctly.
Glue the top on. I did this by laying the "book" on its spine so that it was easier to keep everything squaere
Glue the bookmark to the bottom.
You might need to adjust the hole width depending on your printer's tolerance. I have provided the Fusion 360 file that should allow you to do just that. I removed the name on the side but you can add your own.