System76 Meerkat6 Mount Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple plate to mount a Meerkat6 mini computer from System76 on a wall with no drilled holes
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a simple plate to mount a Meerkat6 mini computer from System76 on a wall using its included VESA mount plate and a couple of command strips or any double sided tape that can support the weight. Basically it just gives a large flat surface area for mounting on the wall. It uses the included VESA plate and its included screw hardware plus 4 M4 nuts. To use insert the shoulder screws into the computer as instructed in the VESA plate guide, then use the 4 M4 bolts included in the kit to mount the VESA plate to the 3d printed plate. Then hang that on the wall with your adhesive of choice. A bit round about but it works for me for putting this thing on a wall without drilling any holes in the wall.