1 / 4
SS12 Switch retainer for Harbor Breeze Solar '26 enclosure — zdjęcie 1
1 / 4

SS12 Switch retainer for Harbor Breeze Solar '26 enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows you to retain the switch, and nothing else.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

If you are able to free the switch from the original board in the Harbor Breeze Solar Spot Light, this allows your to retain the switches functionality in your solar project - you can even use the same screw from the old board. I did trim off the anchor points from the switch with flush cut trimmers, but that's optional (you would instead trim the printed part to make room for them).

I used it in two of my solar repeater projects so far for Meshcore, integrating the switch between the solar controller (see photo) and the transceiver board battery contacts. 

Works well with repeaters from @BlackFlag_5050806 and @PrintnCrap_4693044

Tagi