Slotcar Caravan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Slotcar Caravan to drag along your racetrack and race with your friends!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
A simple Slotcar Caravan to drag along your racetrack and race against your best friends!
The roof is printed very thinly at 1 layer, so make sure your first layer is printed pretty well. This was done to keep the weight of the caravan as low as possible.
On the inside of the body panels is a small recess, insert the roof here and add some glue. Do this for both sides than fit the body with the roof over the chassis, adding some glue.
Because it's hollow, it's quite loud - some lightweight sound dampening inside the body doesn't hurt!
Made for 1:32, if you want it in 1:24 I believe you need to scale up to 133%. Might be a problem for the axle hole in the chassis.
You'll need to make a tow hitch yourself. I made one out of copper which I attached to the underside of a cheap slotcar I had laying around.
No supports needed.
Thanks to a community member on Slotforum, you can see the caravan in action here: