Slotcar Vehicle Trailer

the Slotcar Trailer is meant to tow your most favorite model slotcar around your track, or to try and race with it!

It's a bit too wide, a bit over 100mm, so you can't fit two besides each other on most slottracks track unless hitting each other is the intention. You could narrow it down in your slicer, but measure up your slotcar first to make sure it'll fit. As it is, it'll fit nearly any slotcar, even LMH's or later F1's. Putting the tyres beneath the trailer just makes it ridiculously high, which is why it's so wide.

Because it's so wide, I think you need to make your own axle. I soldered two Carrera axle bearings on the end of cut down axles. There's a version for 2 wheels and 4 wheels.

Warning! - It probably will dip a wheel off the track if you don't have any borders on the inside of corners, so it's not really suited for a 200mm wide track without borders, at all. Does work wonderfully as soon as you add those or on a routed track.

Otherwise, handles quite well!

Made for 1:32, if you want it in 1:24 I believe you need to scale up to 133%. Might be a problem for the axle hole in the chassis.

You'll need to make a tow hitch yourself. I made one out of copper wire which I attached to the underside of a cheap slotcar I had laying around, see photo.