DIY Dawn Powerwash measuring cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cup that is used to measure out the most commonly cited quantities for making your own Powerwash refill.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Make your own Powerwash substitute
Several recipes for a substitute Dawn Powerwash dish spray can be found online. The DIY version is much less costly.
You can use various cups, teaspoons, measuring jars etc. but having done it a few time I found this annoyingly inconsistent and makes for more clearing up afterwards.
This cup is designed using for the quantities most commonly cited to refill one 473ml spray bottle.
Water: 380 mL (distilled water will prevent mineral residue)
Dawn dish soap: 60 mL
· 70% isopropyl alcohol: 30 mL
The cup will hold 30ml in the conical section, and 60ml in the upper cylindrical section.
How to use it
In case it’s not obvious,
pour the alcohol into the conical section, stop at the line where the cylindrical section starts
Add dawn dish soap to the cup until the cup is filled.
Pour the mixture into the empty spray bottle
Add water to fill the bottle.
Gently swirl the mixture to mix it without making foam and then let it stand for a few hours.
If your alcohol is more concentrated you can use less and add water to fill it up to the 30ml line.
Printing
Mine printed without supports in the upright position. I used PLA but wouldn’t wash it in the dishwasher where it might get hot.