Faketec Mini-X case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic case for Faketec Mini-X
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
We couldn't fit the GPS module, but there's room for the vibration motor.
Assembly is as follows:
- Solder the very thin display wires, leaving a little extra room.
- Insert the buttons. If they fall out, you can secure them with tape. The tape will press in later and won't cause any problems with the buttons.
- If there's a vibration motor, install it and feed its wires through the slot provided.
- Insert the board and thread the display wires. The board should rest against the stops, so don't worry about the board being level.
- If there's a vibration motor, now's the time to attach its wires.
- Insert the antenna and connect it to the board, tucking a piece of the cable to the side.
- Solder the display wires to the display and insert it into the guides.
- Install the display cover.
- Install the battery cover.
Everything is held together by friction, but to be on the safe side, you can add a drop of superglue.