1 / 6
Sturdy Juicebox Stand for 5 or 10 liter juice boxes to fit a glas below. Saftkarton Halter — zdjęcie 1
1 / 6

Sturdy Juicebox Stand for 5 or 10 liter juice boxes to fit a glas below. Saftkarton Halter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Juicebox stand for holding a 10l or 5l juice box. High enough to fit a glas below & still stable enough for kitchen use.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Juice box holder / Saftkisten Ständer 

a stable and sturdy holder to keep the juicebox high enough to properly fit a glas below without placing it at the counter top's edge. Juice box ist placed slightly tilted to ensure proper flow. Prints without support nor brim on two beds no glue needed just friction fit.

Stabiler Ständer für 5 oder 10 Liter Saftkartons. Er ist hoch genug um ein Glas mit bis zu 15cm Höhe sauber darunter stellen zu können. So dass der Karton nicht an der Tischkante stehen muss. Weiter ist der Karton leicht geneigt für eine einfachere komplette Entleerung. Der Druck ist für maximale Stabilität und verschwendungsfreien Druck in zwei Teile geteilt. Er benötigt weder Rand noch Unterstützung.

Print parameters:

  • Layerheight 0.25mm

  • 15% infill

  • PLA (PETG will work as well but should not be necessary)

  • 2 perimeter is sufficient

  • no support

  • no brim

  • Prints on Prusa Core One

Size:

  • 240mm length

  • 170mm width

  • 180mm height

Hint:

You might need to separate the two pieces to separate objects in the slicer before placing them on the beds.

If you need even more space for the glas, scale the modell in Z direction only.

Tagi