Pumpkin Decor - Ribbed Fall & Halloween Pumpkin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-part press-fit pumpkin with 12 sculpted ribs. No glue needed (Though recommended), stands 78 mm tall.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A ribbed decorative pumpkin that prints in two parts and presses together - no glue, no hardware.
The body is built from six full-width rib plates arranged around a central hub, giving it twelve sculpted lobes and real depth from every angle. The stem prints separately so you can run it in a second color, and drops into its socket with a 0.1 mm fit clearance.
What you print
Pumpkin x 1 - 78.6 x 78.6 x 66.2 mm
Stem x 1 - 17.4 x 17.4 x 42.4 mm
Assembled it stands about 78 mm (3.1 in) tall. Any bed of 100 x 100 mm or larger fits both parts.
Suggested print settings
Layer height 0.2 mm
Walls / perimeters 3
Top & bottom layers 4
Infill 15-20%, gyroid or grid
Assembly
One step: press the stem into the socket on top of the pumpkin. It is a friction fit - if it is tight, a light twist seats it; if it is loose, a dab of glue holds it.
Want to change it?
The full parametric CAD source - Fusion 360 (.f3d) and STEP - is available as a paid pack on Cults3D (https://cults3d.com/:4858592). It carries a slice_count parameter that rebuilds the whole pumpkin with a different number of lobes: 8, 10, 12, 16 and 20 all rebuild cleanly from that one number.